HeatBustersLogoTitleBar002.jpg

Installation Methods

There are two methods of installing Radiant Barrier, Lay-over and Staple-up. The Heat Busters know that in Texas the greatest efficiency is gained by employing the Staple-up method. Below is a brief discussion of each.

InstallMethods.JPG

Lay-over
     The Lay-over installation is good for people that do not use their attic for any storage.  The Radiant Barrier is simply laid on top of the existing insulation and tacked down in specific areas to prevent any type of movement.  Think of it like a blanket for your attic. This application works very well in older homes that do not have the HVAC unit or duct work in the attic.  Dust accumulation does have a negative impact on radiant barrier effectiveness over time as noted here in a Radiant Barrier Fact Sheet from the Department of Energy. 

Layover01  layover02

Staple-up
    The Staple-up installation is perfect for those who use their attic for storage and/or have the HVAC unit and duct work in the attic. Stapled up against the roof rafters, tightly and visually appealing leaving the attic space completely available and protected. The Radiant Barrier installed by The Heat Busters is a tough material that is not easily punctured or torn, so no worries when your storing those Christmas decorations!  Dust accumulation is not a concern with the Staple-up application.
    Arl-jd-249       hou-06

email: info@theheatbusters.com
phone: (512) 767-0105 or  (817) 239-0926